Alliance Technologies to Exhibit at the 17th Annual Contract Pharma

(August 3, 2018) Alliance Technologies will be back to exhibit at the 17th Annual Contract Pharma. The tabletop exhibit will be held on September 27th & 28th at the Hyatt Regency in New Brunswick, NJ. As an FDA registered and audited lab with a wide range of analytical capabilities and experience, the Alliance Technologies team is… Read more »

Welcome to the Team

Alliance Technologies’ laboratory is expanding! A new scientist has recently joined the Alliance Technologies team. Dongxiang Wang, Ph.D. Dongxiang comes to Alliance after 10 years of analytical research at Penn State University with expertise in separation science (GC, HPLC), thermal methods (TGA, DSC), and spectroscopy (FTIR, UV/vis). At Alliance, she is currently working on developing new methods to… Read more »

Market and Product Intelligence

Alliance Technologies provides market and product intelligence for household and personal care products through quality and comparative analyses. Today’s market is stocked with competing products vying for consumer loyalty. For household and personal care product industries, specific marketing claims and innovation drives the continual development of manufacturers. Alliance Technologies offers a wide range of test… Read more »

Regulatory Testing of Cosmetics and Personal Care Products

As regulatory demands change, Alliance Technologies aims to provide our clients with the most applicable testing services. Happi article, “ACI Comments on 1,4-Dioxane” briefly addresses the continued interest in regulatory control of dioxane. Our analytical team has used a variety of methods (HPLC, GC, GCMS) to assay raw materials and finished products for dioxane (see… Read more »

MD&M East Exhibit

We are eager to exhibit at MD&M East on June 13-15 at the Javits Center in New York. Alliance Technologies (booth #568) will be among over 900 exhibitors and expected 9,000+ attendees taking part in the East Coast’s largest medtech event – register here! As an FDA registered and DEA licensed testing lab, Alliance has… Read more »

Hair Pollution Presentation from Alliance Technologies

Alliance Technologies CEO, Dr. Jonathan Chun will share his expertise during the final session of the upcoming Hair Measurement Science Symposium, June 8, 2017 in Plainsboro, NJ. Dr. Chun will present on “Penetration into Hair: Evolved gas analysis in the study of ‘hair pollution’ and thermal stability” and the analytical tools available for characterizing hair… Read more »

Employee Highlight

Alliance is expanding! Last month we welcomed Quality Assurance Manager, Sandra Metroka and Senior Scientist, Dr. Yi Wang to the Alliance team. Both new team members are eager to assist you in solving your analytical questions.

NYSCC Exhibit

We are excited to return to The New York Society of Cosmetic Chemists Suppliers’ Day and exhibit on May 2-3 at the Javits Center in New York. It’s not too late to register and be a part of the highest attended cosmetic chemistry event on the East Coast! Alliance will be at booth 874 ready… Read more »

Highlighted Capability: Inductively Coupled Plasma/Mass Spectrometry (ICP/MS)

Alliance Technologies is excited to announce the installation of a new ThermoFisher iCAP Inductively Coupled Plasma Mass Spectrometer (ICP-MS) to further expand our ability to meet our clients’ needs for trace and ultra-trace elemental analysis in complex real world matrices such as pharmaceuticals, cosmetics, minerals and in-process or finished good samples. This instrument allows for… Read more »

Case Study: Silicone Deposition on Hair

When key decisions are needed for hair care formulation, product performance, or R&D efforts, analytical data from Alliance Technologies enables our clients to quickly identify the best formulations and compare competitive products. Our analysis objective was to compare the silicone residue of our client’s shampoo to competing products. Scanning Electron Microscope (SEM) images revealed microscopic… Read more »

Upcoming Fall Exhibits

Alliance Technologies will exhibit at the Personal Care Products Council Science Symposium & EXPO on October 25-26 in Alexandria, VA. As an FDA registered and audited lab with a wide range of analytical capabilities and experience, the Alliance Technologies team is well equipped to assist the cosmetics and personal care industry with their analytical testing… Read more »

Expanded Service in Pyrolysis GC-MS and Off-Gas Analysis:

(February 9, 2016) Alliance Technologies is proud to announce the addition of new pyrolysis capabilities with a CDS Pyroprobe 5200 unit. Pyrolysis is the thermochemical decomposition of large, complex molecules into smaller fragments for analysis and identification. The CDS Pyroprobe 5200 can operate up to 1400°C and 500 psi, and features a built-in trap for… Read more »

Highlighted Capability: Scanning Electron Microscopy (SEM)

Alliance Technologies’ SEM capabilities allow us to characterize particles for morphology, size, and shape as well as elemental composition. These images show…

Alliance Technologies at NY Society of Cosmetic Chemists Suppliers’ Day

(April 30, 2015) Alliance Technologies will exhibit at the 2015 NY Society of Cosmetic Chemists Suppliers’ Day, May 12-13 at the New Jersey Convention and Exposition Center in Edison, NJ. Please stop by booth #1237 to discuss your analytical needs and “headaches.”

Alliance Technologies Expands Chemical Identification Capabilities

(January 22, 2015) To address the increased demand for chemical identification and product deformulation, Alliance Technologies expands chromatography capabilities with additional GCMS instrumentation.  The Shimadzu GCMS Systems Alliance Technologies employs support pharmaceutical and medical device clients with residual solvent testing, cosmetics and beauty clients with dioxane or phthalate testing, and chemical or industrial manufacturers with… Read more »

Alliance Updates Analytical Capabilities

(December 15, 2014) Maintaining and improving analytical test capabilities allows Alliance Technologies to meet a wide variety of test requests.  Recent upgrades include addition of a TA Instruments Q600 simultaneous TGA-DSC, installation of an Agilent optimized axial ICP-OES, and a JEOL 6010LA Scanning Electron Microscope (SEM) equipped with a back-scattered electron detector, an energy dispersive x-ray… Read more »

Transportation Research Board Publishes Test Method Developed by Alliance Technologies

(Nov. 21, 2014) Water-reactive substances that release flammable gases when in contact with water are assigned to USDOT Hazard Class 4.3. However, the released gases may also be highly toxic, and the current test method is inadequate for classifying these chemicals.  Alliance Technologies and ScienceSmith Consulting created the initial revision to the HM-14 test standards… Read more »

Sizing Up Scanning Electron Microscopy

(Dec. 10, 2011) SEM and related analytical techniques play a big role in solving problems for a wide variety of clients.  In Drug, Discovery & Development magazine, SEM can be a critical tool for investigations, research and development.  See the whole article here.

Growth Fuels Additional Laboratory Expansion for Alliance Technologies

(Nov. 18, 2011) After a laboratory expansion in 2009, Alliance Technologies announces a move into larger laboratory space as of November 28, 2011.  9 Deer Park Drive, Suite B at thePrinceton Corporate Plaza will offer larger office and laboratory space and facilitate expansion in chromatographic separations (LC, GC, IC), microscopy (FTIR), and corrosion/failure analysis.

Johnson & Johnson Analytical Symposium Gathers Analytical Service Providers

(Sep. 1, 2011) Alliance Technologies will participate in the annual J&J Analytical Symposium vendor show to highlight laboratory service capabilities in medical devices, chemical analysis and R&D support.

Alliance Technologies Presentation at the Eastern Analytical Symposium

(Aug. 15, 2010) Alliance Technologies will present an invited seminar on finding value from contract laboratories at the Eastern Analytical Symposium (EAS) in Somerset, NJ (Nov. 15-18). With its broad diversity of analytical capabilities, Alliance Technologies is uniquely positioned to serve as a single-source contract analytical laboratory for many industries. In a down economy, finding… Read more »